Products

 Product Description

Pumptec Pump Motor Set, 115V 60Hz

500 PSI

C342

Product Description

Water lift is measured with a gauge with the airline sealed. But sealed air doesn’t clean- most vacuums are designed to work at a 3/4” to 7/8” orifice. That is approximately the opening of a wand slot. We want to measure the water lift at the carpet, not at the machine. To accomplish this, Mytee put a vacuum gauge on the wand head to measure the water lift at the carpet. Mytee’s revolutionary new hybrid vacuum motor has an increase of almost 30% at an unbelievable lift at the carpet of 113”. While base specifications may seem lower, the in-use specifications are in reality much higher than those of comparable motors. This high efficiency is due to the unique winding of the motor and special fan configuration.

C302A Vacuum Motor

More water lift at the carpet. Mytee’s new LX Hybrid Vacuum Motor outperforms where it matters most.

Specifications on single vacuum motor:

• 173 CFM at 2″ orifice
• 7.5 amp draw
• 6.6 diameter

Specifications for two motors in air series:

• 225-250 CFM 
• 7.5 amp draw per cord

More water lift at the carpet. Mytee’s new LX Hybrid Vacuum Motor outperforms where it matters most.

Water lift is measured with a gauge with the airline sealed. But sealed air doesn’t clean- most vacuums are designed to work at a 3/4” to 7/8” orifice. That is approximately the opening of a wand slot. We want to measure the water lift at the carpet, not at the machine. To accomplish this, Mytee put a vacuum gauge on the wand head to measure the water lift at the carpet. Mytee’s revolutionary new hybrid vacuum motor has an increase of almost 30% at an unbelievable lift at the carpet of 113”. While base specifications may seem lower, the in-use specifications are in reality much higher than those of comparable motors. This high efficiency is due to the unique winding of the motor and special fan configuration.

Specifications on single vacuum motor:

• 173 CFM at 2″ orifice
• 7.5 amp draw
• 6.6 diameter

Specifications for two motors in air series:

• 225-250 CFM 
• 7.5 amp draw per cord

Product Description

Pumptec Pump Motor Set, 115V 60Hz

1,200 PSI max.

2.2 GPM

C359A

Product Description

Regulator with white spring.

Product Description

Solenoid Pump, 55psi, 115V.

C378

StyleSolenoid

PSI55Volts115v

Shipping weight2 lbs.

Product Description

3.3 GPM Pump-Out Pump. 115V

C381

Product Description

3.3 GPM Pump-Out Pump. 230V

C381A

Product Description

35 GPM Pump-out Pump for Mytee Flood Extractor.

C384A

Product Description

C388 Pump-Out 66 GPM, 115V

Mytee CRB3010 Carpet Shark™ 10″ Counter Rotating Brush – Professional Carpet Cleaning Tool

The Mytee CRB3010 Carpet Shark™ is a versatile 10″ counter rotating brush designed for professional carpet cleaning, tile & grout maintenance, and chemical encapsulation. This Carpet cleaning brush uses its dual belt-driven motors to deliver quiet, powerful agitation. It lifts dirt, debris, and embedded particles from carpets while activating cleaning solutions for deep, thorough results.

Mytee CRB3010 Carpet Shark Key Features:

• 10″ counter rotating brush width – perfect for residential and commercial jobs
• Dual belt-driven motors – reliable, quiet operation and easy maintenance
• Foot-activated power switch – convenient and hands-free control
• Collapsible handle – ideal for cleaning stairs or tight spaces
• Encapsulation & Tile/Grout Cleaning – lifts dirt and agitates cleaning chemicals efficiently

The Carpet Shark™ is lightweight, durable, and easy to maneuver, delivering professional results for carpet agitation, encapsulation cleaning, and tile/grout maintenance. It works well as a Dual motor carpet brush and a Tile & grout cleaning brush. Perfect for restoration contractors, janitorial services, and carpet cleaning professionals.

Included Items:

• Set of two Soft White Carpet Brushes (part no. A965)
• Set of two renovator attachments to collect debris
• Splash guard and wheel attachment
• Magnetized storage tray to protect your investment

Optional Accessories:

Every Carpet Shark™ comes with a set of soft white carpet brushes. Mytee also offers blue and black brushes for commercial carpet and tile and grout respectively (sold separately).

Product Specifications

Product Documentation

• User Manual
• Parts List (115V 60Hz version)
• Parts List (230V 50Hz version)
• Product Brochure

Mytee CRB3017 Carpet Shark™ 17″ Counter Rotating Brush

The Mytee CRB3017 Carpet Shark™, also known as the Mytee CRB3017 Carpet Shark, is a high-performance 17″ counter rotating brush. It is designed for deep carpet cleaning, chemical encapsulation, and tile & grout maintenance. With dual belt-driven motors, this professional floor brush provides powerful, quiet, and smooth agitation. It lifts embedded dirt and activates cleaning solutions for superior results.

Key Features:

• 17″ counter rotating brush width – covers more area for faster cleaning
• Dual belt-driven motors – powerful, quiet, and easy to maintain
• Professional carpet agitation & encapsulation – lifts dirt and cleans fibers efficiently
• Tile & grout cleaning capability – versatile for multiple surfaces
• Durable, lightweight construction – easy to maneuver on stairs or large floor areas

Perfect for commercial carpet cleaning, janitorial services, and restoration professionals, the Mytee CRB3017 Carpet Shark ensures faster, more effective cleaning. It handles carpet fibers, grout lines, or chemical encapsulation tasks with ease.

Included Items:

• Set of two Soft White Carpet Brushes (part no. A965A)
• Set of two renovator attachments to collect debris
• Flat splash guard attachment
• Wheel attachment for easy transport
• Magnetized storage tray to protect your investment

Optional Accessories:

Every Carpet Shark™ comes with a set of soft white carpet brushes. Mytee also offers blue and black brushes for commercial carpet and tile and grout respectively (sold separately).

Product Specifications

Product Documentation

• User Manual
• Parts List (115V 60Hz version)
• Parts List (230V 50Hz version)
• Product Brochure

Product Description

3 position Rocker Switch.

E516

Product Description

Product Description

POWER CORD, MALE END, BLUE LIT, 25′, 12/3, SJTW SOLID JACKET

Power Cord.

Product Description

2 position rocker switch, 35 amp

E536

Mytee E573 Replacement Thermostat

The Mytee E573 Thermostat is a replacement thermostat rated at 210°F and designed with 1/4" vertical quick connects. This Mytee replacement part features a fixed surface bracket and is designed for compatible equipment requiring these specifications.

Mytee E573 Thermostat Specifications

• Part Number: E573
• Thermostat Rating: 210°F
• Connection Type: 1/4" vertical quick connects
• Size: 1/4"
• Material: Plastic
• Surface Bracket: Black, fixed
• Product Weight: 1 lb.
• Shipping Weight: 2 lbs.
• SKU: 5431
• Barcode: 5431

Mytee Replacement Equipment Part

Before ordering, compare the E573 part number, temperature rating, connection type, size, and surface bracket configuration with the thermostat currently installed in your equipment to help confirm compatibility.

Mytee E574 Replacement Thermostat

The Mytee E574 Thermostat is a replacement thermostat rated at 310°F ± 10°F and designed with 1/4" vertical quick connects. This Mytee replacement part is identified by part number E574 and is suitable for compatible equipment requiring these thermostat specifications.

Mytee E574 Thermostat Specifications

• Part Number: E574
• Thermostat Rating: 310°F ± 10°F
• Connection Type: 1/4" vertical quick connects
• Size: 1/4"
• Material/Finish: Stainless white
• Product Weight: 1 lb.
• Shipping Weight: 2 lbs.
• SKU: 8159

Mytee Replacement Equipment Part

Before ordering, compare the E574 part number, thermostat rating, connection type, and size with the thermostat currently installed in your equipment to help confirm compatibility.

Mytee ECO14-PRO Orbital Floor Machine – Powerful, Quiet, and Versatile

The Mytee ECO14-PRO orbital floor machine delivers professional, all-surface cleaning performance in a portable and easy-to-use design. Featuring a 1.5 horsepower motor, this orbital floor machine overcomes surface tension. It provides faster, deeper cleaning on carpets, LVT, VCT, polished concrete, and marble floors.

Whether you are a commercial carpet cleaner, janitorial professional, or restoration specialist, the ECO14-PRO ensures consistent, professional results with minimal effort.

Ideal For:

• Encapsulation cleaning on commercial and residential carpets
• LVT and VCT flooring
• Polished concrete
• Marble and natural stone floors

Why Choose the ECO14-PRO Orbital Floor Machine?

• Powerful 1.5 HP motor – lifts dirt and overcomes surface tension for faster cleaning
• 14″ cleaning path – covers large areas efficiently
• Built-in 4-gallon shampoo tank – easy solution management for longer cleaning sessions
• 60 PSI solution pump with dual low-drift spray jets – thorough coverage without overspray
• Smooth, low-vibration operation – comfortable, quiet, and easy to control
• 10″ non-marking foam-filled wheels – glide over stairs, curbs, and obstacles

The Mytee ECO14-PRO combines truckmount-level cleaning power with portability. The Mytee ECO14-PRO orbital floor machine is ideal for professionals who need versatile, quiet, and high-performance floor cleaning equipment.

Includes:

• 14 inch pad driver
• Two 17 inch microfiber pads
• 50 foot twist-lock power cord

Product Specifications

Product Brochures

• User Manual
• Product Brochure
• Parts List (115V 60Hz version)
• Parts List (230V 50Hz version)
• Wiring Diagram

Run Silent, Clean Deep with the Mytee ECO17-PRO Orbital Floor Machine

The Mytee ECO17-PRO Orbital Floor Machine, also known as the Mytee ECO17-PRO orbital floor machine, is a professional all-surface floor cleaning machine designed to deliver powerful, efficient, and quiet performance.

Unlike typical orbital machines, it features an industry-exclusive 1.5 horsepower motor.

This gives it the strength to overcome surface tension for faster, deeper cleaning.

Perfect for Multiple Floor Types

The ECO17-PRO is a versatile solution for:

• Commercial and residential carpet (encapsulation cleaning)
• LVT and VCT flooring
• Polished concrete
• Marble and stone flooring

This makes it ideal for cleaning companies, facilities managers, and professional contractors.

It is built for teams that need one machine that works on all floor types.

ECO17-PRO Key Features

• 1.5 horsepower motor – Overcomes surface tension for faster, more thorough cleaning
• 17-inch cleaning path – Covers large areas efficiently
• Built-in 4-gallon shampoo tank – Easy on-board solution storage
• 60 PSI solution pump – Delivers consistent cleaning solution for all floor types
• Dual front-mounted spray jets – Low-drift for precise application
• Smooth, low-vibration design – Comfortable for extended use
• 10-inch non-marking foam-filled wheels – Easy mobility over stairs, curbs, and uneven surfaces

Why Choose the ECO17-PRO Orbital Floor Machine?

The Mytee ECO17-PRO combines power, precision, and portability into a single professional-grade floor machine.

Its low-vibration operation reduces operator fatigue.

The dual spray jets and high-pressure solution pump support effective cleaning on carpet, tile, stone, and concrete.

For commercial floor cleaning, residential maintenance, or multi-surface projects, the ECO17-PRO delivers strong performance and dependable operation.

Includes:

• 17 inch pad driver
• Two 19 inch microfiber pads
• 50 foot twist-lock power cord

Product Specifications

Product Documentation

• User Manual
• Product Brochure
• Parts List (115V 60Hz version)
• Parts List (230V 50Hz version)
• Wiring Diagram

Escape® LX™ Plus Electric Truckmount – Powerful, Efficient, and Eco-Friendly

The Escape® LX™ Plus is the next generation electric truckmount extractor, designed to deliver gas-level power at a fraction of the cost. Equipped with three exclusive Mytee® LX™ vacuum motors, this electric truckmount produces 350 CFM and 17.5 in. Hg, offering professional-grade water lift and suction for carpet, upholstery, and hard surface cleaning.

Enjoy all the advantages of electric operation—lower operating costs, minimal maintenance, and reduced environmental impact—without sacrificing raw power. The Escape® LX™ Plus is built for professional carpet cleaners who want efficiency, versatility, and superior cleaning performance.

Key Features of the Escape® LX™ Plus

• Three Mytee® LX™ vacuum motors – 350 CFM, 17.5 in. Hg for maximum water recovery
• 250′ effective hose run – clean large areas without moving the unit
• 12-gallon solution and recovery tanks – ample capacity for commercial jobs
• 1,200 PSI adjustable solution pump (regulated to 1,000 PSI) – delivers consistent cleaning power
• 3.5 GPM automatic pump-out – efficient recovery for faster job completion
• Chemical metering system – precise solution application for better cleaning results
• Auto-fill and auto pump-out – convenient, time-saving features
• Lightweight design – only 190 lbs for easy installation and mobility
• Single 5′ 4-prong power cord – draws 30 amps @ 230V 60Hz

Includes:

• F200 Lint Hog™ In-line Filter – (Retail Value $119)
• 7 qt. Big Mouth™ Bottle for chemical injection
• 2″ x 2″ male Cuff-Lynx™ coupler
• 2″ x 2″ female Cuff-Lynx™ coupler

Why Choose the Escape® LX™ Plus?

The Escape® LX™ Plus Electric Truckmount combines power, reliability, and eco-friendly operation into a professional cleaning powerhouse. Its LX™ vacuum motors and high-pressure solution pump make it perfect for large-scale residential and commercial carpet cleaning, upholstery extraction, and hard surface maintenance.

Switch to the Escape® LX™ Plus and enjoy gas-level performance with electric efficiency, faster recovery, and lower costs—making every cleaning job easier, faster, and more profitable.

Product Specifications

Product Documentation

• User Manual
• Parts List
• Wiring Diagram
• Product Brochure

Mytee G004 Vacuum Motor Gasket

The Mytee G004 Vacuum Gasket is a replacement gasket for compatible Mytee vacuum motor applications. Made from closed-cell neoprene, this gasket is designed without adhesive for installation where a non-adhesive vacuum motor gasket is required.

Mytee G004 Gasket Specifications

• Part Number: G004
• Product Type: Vacuum motor gasket
• Material: Closed-cell neoprene
• Adhesive: None

Mytee Replacement Vacuum Gasket

The G004 is designed for compatible Mytee equipment requiring a vacuum motor gasket. Before ordering, compare the existing gasket and equipment requirements with the G004 specifications to help confirm compatibility.

Mytee G021 Mesh Screen Filter

The Mytee G021 Mesh Filter is a replacement screen filter with a 2-3/8" diameter. Designed as a Mytee equipment replacement part, this compact mesh screen filter is suitable for compatible equipment requiring the G021 configuration.

2-3/8 Inch Mytee Screen Filter

• Mytee part number: G021

• Filter style: Mesh screen filter

• Diameter: 2-3/8"

• Weight: 0.1 lb

• SKU: 9906

• Barcode: 70791131006662

Mytee Replacement Filter

Before ordering, compare the G021 part number and 2-3/8" diameter with the requirements of your Mytee equipment to verify compatibility.